Product ID:ROSIN CORE SOLDER, WRA, WRMA, WR
MSDS Date:09/01/1986
FSC:3439
NIIN:01-008-7578
MSDS Number: BJMGR

BOW SOLDER PRODUCTS CO.

900 HOBSON STREET
UNION, NJ 07083
US

Emergency Phone: 201-686-6040

Info Phone: 800-526-4496

Cage: 52329

BOW ELECTRONIC SOLDERS

SAYREVILLE, NJ 08872 US

Telephone: 732-316-2177

Cage: 52329

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 1-99%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 1-99%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192

ROSIN ACID

CAS: 8050-09-7

DIPROPYLENE GLYCOL

CAS: 110-98-5

RTECS: UB8785000

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:LEAD POISONING AFTER LONG-TERM EXTREME
EXPOSURE FROM INGESTION OR INHALTION OF COMPOUNDS OR FUMES.
Explanation of Carcinogenicity:NONE OF THE CHEMICALS IN THIS PRODUCT IS
LISTED BY IARC, NTP OR OSHA AS A CARCINOGEN.
Effects of Overexposure:SYMPTOMS OF LEAD POISONING: METALLIC TASTE,
ABDOMINAL PAIN, CONFUSION, LEAD LINE ON GUMS, NAUSEA, JOINT OR
MUSCLE PAIN OR WEAKNESS, POSSIBLE LOSS OF WEIGHT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHALATION: REMOVE SUBJECT TO FRESH AIR. IF BURNED FROM
MOLTEN METAL, GIVE ORDINARY BURN FIRST AID. DO NOT ATTEMPT TO
REMOVE ROSIN FROM SECOND OR THIRD DEGREE BURNS. USE SOLVENTS TO
REMOVE ROSIN FROM MINOR FIRST DEGREE BURNS.

Flash Point:300 F CORE
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:IN EXTREMELY HIGH TEMPERATURE FIRES, LEAD MAY
EMIT TOXIC FUMES. USE A SELF-CONTAINED RESPIRATORY SYSTEM.
Unusual Fire/Explosion Hazard:MODERATE HAZARD WHEN HIGH CONCENTRATION
OF VERY FINE METALLIC DUST IS EXPOSED TO HIGH HEAT OR OPEN FLAME.

Spill Release Procedures:NORMAL HOUSEKEEPING FOR SOLID METAL. METALLIC
POWDER OR DUST SHOULD BE VACUUMED OR WET SWEPT USING A RESPIRATOR
AND PROTECTIVE CLOTHING.
Neutralizing Agent:NONE APPLICABLE FOR THIS MATERIAL

Handling and Storage Precautions:USE GOOD HOUSEKEEPING PRACTICES TO
PREVENT ACCUMULATING OF DUST AND TO KEEP AIRBORNE DUST
CONCETRATIONS AT A MINIMUM.
Other Precautions:AVOID BREATHING DUST OR FUMES. WASH HANDS AFTER
HANDLING. DO NOT SMOKE OR EXPOSE FOOD TO DUST. KEEP AREA CLEAN.

Respiratory Protection:NONE SPECIFIED BY MANUFACTURER.
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GENERAL AND /OR LOCAL
EXHAUST) VENTILATION TO MAINTAIN EXPOSURE LEVELS BELOW TLV'S.
Protective Gloves:NOT USUALLY NECESSARY.
Eye Protection:FACE SHIELD/EYE GOGGLES WHEN SOLDERING.
Other Protective Equipment:EYEWASH STATIONS SHOULD BE IN CLOSE
PROXIMITY.
Work Hygienic Practices:WASH THROUGHLY AFTER HANDLING AND BEFORE
EATING. NO EATING, DRINKING, SMOKING, OR APPLYING COSMETICS AROUND
SOLDER USE.
Supplemental Safety and Health
SINCE EMPTY CONTAINERS MAY RETAIN PRODUCT RESIDUES ALL LABELED HAZARD
PRECAUTIONS MUST BE OBSERVED.

HCC:N1
Boiling Pt:B.P. Text:250 F CORE
Vapor Pres:NONE@750 F
Spec Gravity:1.1 CORE
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR SOLID AT ROOM TEMPERATURE WITH LIGHT ROSIN
ODOR.
Percent Volatiles by Volume:10-25%

Stability Indicator/Materials to Avoid:YES
ACIDS, BASES AND OXIDIZERS. MOLTEN METAL MAY REACT VIOLENTLY WITH
WATER.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:TEMPERATURE ABOVE MELTING POINT MAY
EMIT TOXIC FUMES.

Waste Disposal Methods:SCRAP DRIPPINGS AND DROSSES SHOULD BE STORED IN
A CLOSED CONTAINER AND RETURNED TO A LEAD RECYCLER. FOLLOW FEDERAL,
STATE AND LOCAL REGULATIONS REGARDING DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.